Salto CU4200

The New SALTO XS4 2.0 Controller CU4200 is an auxiliary controller that do not requires an IP address and can be set up as an auxiliary controller connected to an XS4 online controller (CU42E0) or can work as offline controller reducing the costs of installation keeping all the advantages of the SALTO Data-on-card technology.

This means that extending SALTO access control benefits to all those doors where a stand-alone electronic escutcheon cannot be fitted (electric strikes, magnets, barriers, elevators, etc.) is even easier and more cost-effective.

Supplied with translucent or Grey mounting box.

Features

• Two wall reader connection that can be configured as 2 different doors or one door reader in and reader out locking.
• Antipass-back mode available by connecting 2 wall readers and set up as one door.
• 4 relay outputs.
• 6 inputs to connect to:
• Door detector, request to exit switch (RTE), office switch.
• 2 different tampers: 1 x tamper input, tamper switch.
• Door monitoring and tamper monitoring via contacts input (intrusion alarm and door left opened alarm).
• To be used with all SALTO XS4 2.0 Readers (WRDxxxx and WRMBXXXX series).
• Virtual network capable through SALTO Virtual Network technology.
• All communications between the carrier and the wall reader are encrypted and secure.
• The maximum cable length between the door controller and the wall reader is up to 400 meters (Depending on the cable).
• Connection to the wall reader using 4 wire connection, twisted pair.
• Power consumption: 12V DC 400mA (without XS4 2.0 readers), supplied by an adaptor. POE version to be released.
• Includes translucent mounting box.