Inception IK-INC4
$1,360.01 (incl. GST)
POSMarket SKU: Z15946
IK-INC4: Controller Kit 4, Sm Enclosure, Battery & 2x OSDP Converters, Wiegand Ready
Inception controller kit4 Weigand Ready
Our expert team has specialised
training & experience to help
find the right solution for your
business.
POSMarket SKU: Z15946
Inception controller kit4 Weigand Ready
| Inception Controller | |
| Case Material | ABS plastic |
| Dimensions | 205mm x 94mm x 36mm |
| Shipping Weight (gross) | 1.2kg |
| Installation Environment | 0°C-50°C @ 15%-90% relative humidity (non-condensing) |
| Power Source - To “DC IN” (recommended): - To “BATT” (alternate method): | 18V to 24VDC 2.5A (e.g. the supplied 24V 2.5A PSU) Note: A 12V, SLA Battery of 7AH to 18AH capacity must be connected to 'BATT' input. 12.8V-14VDC 2.8A (e.g. a separate external battery-backed power supply) Note: "DC IN" should not be connected when powered via the BATT connection |
| Battery (supplied separately) | 12 Volt Sealed Lead-Acid (gel) type - 7 to 18 Amp-Hour |
| Idle Current Consumption - DC IN: (24V DC) - BATT: (DC IN = 0V) Note: Does not include battery charging or current required by any peripheral devices. | 60mA (85mA with Ethernet connected) 110mA (150mA with Ethernet connected) |
| Additional Current Required For: - Built-in Relays: (out 1 ~ out 4) - Inception WiFi Adapter: - Inception 4-Port USB Hub: | 25mA per relay (33mA when Controller powered from "BATT" input) 25mA (40mA when Controller powered from "BATT" input) 20mA (40mA when Controller powered from "BATT" input) Not including current required by any device connected to a USB Port |
| Power Supply Outputs: - V OUT (4-PIN): - V OUT (2-PIN): - LAN +: - READER +: - USB 2.0: - Maximum Combined Current - All Outputs | See notes 1 & 2 below 13.4VDC +/-150mV 750mA max 13.4VDC +/-150mV 1.5A max 13.4VDC +/-150mV 350mA max 13.4VDC +/-150mV 1A max 5VDC 500mA max 2.5 A |
| Battery Charger Output Voltage: | 13.75VDC / Output Current: Up to 500mA |
| Typical Battery Backup Time: - 7AH Battery: - 18AH Battery: - 18AH Battery: | With Ethernet or Wi-Fi + 1 LCD Terminal + up to 200mA for other devices. 16 Hours 40 Hours 24 Hours Configuration as above but up to 500mA for other devices. |
| AC Fail Detect (on "DC IN"): | 16 Hours |
| Output Fuses: | 40 Hours |
| Battery Input Fuse: | 24 Hours Configuration as above but up to 500mA for other devices. |
| Battery Deep Discharge Protection Activated: | 10.4V / Restored: 12.5V |
| Zone Inputs: | 8 |
| Relay Outputs: | 4 (“OUT1-4”) |
| Relay Contact Rating: | 5A 30VDC or AC (See note 2 below) |
| Indicator LED's: | 11 |
| Alarm Reporting Formats: | ContactID or IR-fast (via T4000 or SkyTunnel) |
| 12V 7.0Ah Sealed Lead Acid Battery | |
| Cells Per Unit | 6 |
| Voltage Per Unit | 12 |
| Capacity | 6.5Ah@20hr-rate to 1.75V per cell @25 C |
| Weight Approx. | 1.9 Kg |
| Max. Discharge Current | 65A (5 sec) |
| Internal Resistance | Approx. 35 mΩ |
| Operating Temperature Range | Discharge: -20°C ~60°Charge: 0°C~50°C Storage: -20°C~60°C |
| Normal Operating Temperature Range | 25 C+/-5 C |
| Float charging Voltage | 13.7 to 13.9 VDC/unit Average at 25 C |
| Recommended Maximum Charging Current Limit | 2.0 A |
| Equalization and Cycle Service | 14.6 to 14.8 VDC/unit Average at 25 C |
| Self-Discharge | Valve Regulated Lead Acid (VRLA) batteries can be stored for o more than 6 months at 25C. Self f-discharge ratio less than 3% per month at 25C. Pleas e charge bat teries before using |
| Terminal | Faston Tab 187(F1)/Faston tab 250(F2) |
| Constainer Material | A.B.S. (UL94-HB) , Flammability resistance of UL94-V2 can be available upon request. |
| Dimensions | 151(L) 65(W) 100(H) |
| Wiegand Converter | |
| Physical | |
| PCB Size | 85(L) x 35(W) x 15(D) (mm) Included connectors |
| Mounting Method | Within a secure location - can be mounted using velcro strips |
| Installation Environment | 0° to 65° Celsius. 15-85% Relative humidity (non-condensing) |
| Reader Protocols | |
| Device Communications | OSDP, SIFER & Wiegand |
| Connections | |
| OSDP Port | 4 pin connector +V, 0v, A, B |
| Wiegand Reader | 4 pin connector D0, D1, +V, 0 |
| Wiegand LED & Beeper | 3 pin connector Invalid LED, Valid LED, Beeper |
| Port 0 | 5 pin connector to suit Port 0 cable (996030USB) |
| Reader Security | |
| OSDP Communications Bus | 128bit AES encryption |
| Device Configuration | |
| Configurable options include | RS-485 OSDP Baud Rate, Wiegand bit length, OSDP reader primary LED colour, OSDP reader 2nd LED colour, SIFER reader LED brightness, SIFER reader speaker volume |
| Power Requirements | |
| Input | 11-14V DC |
| Current Consumption | Idle 20mA - Peak 35mA (Not including any connected readers, LEDS or beepers) |
| Model | Description | Price | Stock | |
|---|---|---|---|---|
| IK-INC4 | Controller Kit 4, Sm Enclosure, Battery & 2x OSDP Converters, Wiegand Ready | $1,360.01 | Add to Cart |
| Filename | Size | ||
|---|---|---|---|
 |
IK-INC4 kit | 380KB | Download |
|
995200 Datasheet.pdf | 3MB | Download |
|
994200 Datasheet.pdf | 3MB | Download |
Inner Range 996300AU
Access Control > Controllers
Inception IK-INC1
Access Control > Controllers
Inception IK-INC3
Access Control > Controllers
Most of our shipments are delivered using Australian courier companies such as Toll, Star Track Express, TNT or Border Express. Over 90% of orders are delivered within 2 business days.
Contact our sales team to see if the item you want to purchase is available to collect from the warehouse nearest to you.
We have many international clients. Contact our sales team for delivery costs and times.
POSMarket can provide your business with the hardware, software, services and consumables you need to take your business to the next level. We can develop custom software for your next project or customise a solution from off-the-shelf software to suit your needs.
Request a Consultation Today