1300 737 998
Need Help?

Our expert team has specialised
training & experience to help
find the right solution for your
business.

Call 1300 737 998

Concept IK-995035D4

$1,962.54 (incl. GST)

POSMarket SKU: Z16436

IK-995035D4: Concept 4000 Intelligent 4-Door Access Module Kit

Intelligent 4-Door Access Module Kit

Product Rating
Product Overview
This Intelligent 4-Door Access Module Kit contains the following components:

1 x Intelligent 2-Door Controller PCB and Accessories Kit
1 x 2-Door Plug-on Expansion Board for Intelligent 2-Door Controller

Intelligent 2 Door Access Module Intelligent 2/4 Door Access Module
The Intelligent Two Door Access Module (ITDAM) provides an interface for 1 to 4 Doors using up to 8 Readers

2-Door Plug-on Expansion Board for Intelligent 2-Door Controller
The 2-Door Expander Board allows the Intelligent 2-Door Access Module to be expanded to support up to 4 Doors. This board will also support a Plugon Reader Expander option to provide Reader In / Reader Out operation for the addtitional Doors.

Features
  • On-board 3 amp power supply
  • 2 on-board lock relays
  • Optically isolated LAN input provides 5kV isolation for protection from surges
  • Separate valid, invalid and Door Open Too Long (DOTL) output for each door
  • Separate reed, tongue, Request to Enter (REN), Request to Exit (REX) & Arminputs for each reader
  • All card reader interfaces operate with common magnetic swipe and Wiegandreaders without the need for any additional interfaces
  • Onboard review buffer for offline operation
  • Each card reader may be independently configured, allowing a combination ofcard reader technologies
  • Door open too long pre warn function
  • 8 General purpose Onboard zone inputs
Product Specifications
Intelligent Two Door Access Module
Part number 995036PCB&K
Physical
Cabinet Dimensions 460(L) x 358(W) x 85(D) (mm)
Installation Environment 0°C - 40°C @15 - 85% Relative humidity (non-condensing)
Electrical PCB Versions; Transformer Versions
Mains Input Voltage N/A; 240VAC 50Hz
Mains Input Current N/A; Max 500mA
Input Voltage to PCB 16-18VAC; 16-18VAC
Total Current Limit Power supply source dependent 3A
Recommended current allowance for battery charging N/A; 300mA
Available Current (for detectors, Power supply aux’s, relays, local LAN etc). Source dependent; 2A
All versions
Fuse Protection Separate fuses for DET+, LAN, Locks & Readers
Operational Current (no peripherals connected)
Intelligent 2DAM 145mA (Both lock aux’s on: 240mA)
- Plug-on Reader Expander Add 20mA
- 2 Door Expander Board Add 30mA (Both lock aux’s on: 120mA)
Inputs
Zone Inputs 8 General purpose Zone Inputs
Door Inputs Door reed, REX, REN, Arm & tongue sense per door
Reader Ports 2 (Expandable to 8)
Outputs
Relays 2 (Expandable to 4, typically used for door locks)
Outputs (open collector) 14 expandable to 20
(8 General purpose; separate valid, invalid and DOTL output for each door)
2 Door Expander Board 2 Door Expander Board
Electrical Specifications
Power Supply Input From host Intelligent 2 Door Access Module.
Reader Head Supply O/P 5V or 13.75V DC
300mA maximum per Reader.
Current Consumption 30mA standby.
Lock Auxiliaries: 45mA per Relay for Unlocked state.
(Does NOT include current drawn by peripheral devices. e.g. Readers, Locks, Sounders, Detectors, etc.)
NOTE: Small Prox Reader (~5-10cm range): Allow 50-120mA. Standard Prox Reader (~15cm range): Allow 120-180mA.
These values are general approximations. See information supplied with Reader for actual current consumption.
Lock Relay Contact rating:
30 V DC. 1 Amp maximum.
Fuse Protection Lock Power:
1A. Slow Blow M205 (20mm)
Reader Power 0.5A. Fast Blow M205 (20mm)
ALWAYS REPLACE FUSES WITH SAME FUSE TYPE AND VALUE
Maximum cable length Europe Only. To meet EN standard 50130-4, cables connected to this device must be less than 30 metres in length.
Physical Specifications
PCB size 200mm x 94mm
Operating Environment 0° to 40° Celsius and 15% to 80% Relative humidity (non-condensing)
ModelDescriptionPriceStock
IK-995035D4 Concept 4000 Intelligent 4-Door Access Module Kit $1,962.54
Call
Add to Cart
Product Accessories
Not all accessories and consumables are listed on our website. Please contact one of our experts using the 'Ask an Expert' form or call us on 1300 737 998 if you don't find what you're looking for.
FilenameSize
PDF Document 995035 Datasheet.pdf 393KB Download
PDF Document 995035 Installation Guide.pdf 2MB Download
PDF Document 995036PCBK Installation Guide.pdf 1MB Download
Product Videos
No videos found for this product.

Please contact our team for more information using the 'Ask an Expert' form or call us on 1300 737 998.

Contact our Team
Warehouse Locations
Warehouse Locations
NSW
  • Huntingwood 2148
  • Rosehill 2142
  • Rydalmere 2116

QLD
  • Acacia Ridge 4110
  • Tingalpa 4173

VIC
  • Box Hill 3128

WA
  • Burswood 6100

Related Products

Integriti 996012PCBK Integriti 996012PCBK

Access Control > LAN Media, Module, Unibus

Integriti IK-996005M8RPSB Integriti IK-996005M8RPSB

Access Control > LAN Media, Module, Unibus

Integriti 996005PCB&K Integriti 996005PCB&K

Access Control > LAN Media, Module, Unibus

Fast Delivery
Courier Delivery
Express Courier Delivery

Most of our shipments are delivered using Australian courier companies such as Toll, Star Track Express, TNT or Border Express. Over 90% of orders are delivered within 2 business days.

Click and Collect
Click & Collect

Contact our sales team to see if the item you want to purchase is available to collect from the warehouse nearest to you.

International Delivery
International Delivery

We have many international clients. Contact our sales team for delivery costs and times.

Cost-effective solutions to suit your business needs

POSMarket can provide your business with the hardware, software, services and consumables you need to take your business to the next level. We can develop custom software for your next project or customise a solution from off-the-shelf software to suit your needs.

Request a Consultation Today