Salto CUADAP

The Salto - XS4 Original Control unit adaptor - CUADAP opens the integration with third party devices such as time and attendance systems. The Control Unit Adaptor is connected to the CU50ENSVN, sending data and information requested to a third party device. This means that you can access a door with all the convenience of SALTO and control your staff attendance at the same time. The interface with the external device can be RS232, OMRON and Wiegand.

Control adaptor for connection of SALTO controls with external systems (Online reader to Honeywell module bus RS-485).
This pcb provides a Wiegand interface. Using the Honeywell converter pcb item no. 027901, in parallel to the Ethernet-connection a connection to the module bus can be established which can be used for access control and/or arming / disarming in addition to the update function.

All online readers have read / write function and are connected via Ethernet (TCP/IP) to the workstation the SALTO software is running. Normally this is the same workstation IQ MultiAccess or IQ SystemControl is installed. The online reader is required for updating of authorizations of transponders and distribution of blacklist information. Bookings and events of doors which are stored on the transponders are read here and transferred to the AC-software. So at least one online reder per system is required.