Our expert team has specialised
training & experience to help
find the right solution for your
business.
This controller kit includes the following items:
1 x Inception Controller
1 x Low Profile Enclosure with Mounting Plate - Small
1 x 12V 7.0Ah Sealed Lead Acid Battery
Inception Controller
Inception is a budget friendly integrated access control and security alarm system with a design edge that sets it apart from the pack and makes it both a powerful and extremely flexible security solution. Apart from its modern and sleek looks, Inception's software is built directly into the controller - so the only tool you will need is a web browser.
Low Profile Enclosure with Mounting Plate - Small
Designed for our Concept 4000 Module PCBs, the Low Profile Metal Enclosures present a modular, application oriented solution to suit a variety of installation requirements. The four sizes of Low Profile Enclosures are designed to minimise necessary wall space and simplify the practice of selecting and installing enclosures. Powered and non-powered versions of each kind of enclosure are available. Four sizes of mounting plates enable many combinations of associated module PCB types to be installed within the same enclosure.
12V 7.0Ah Sealed Lead Acid Battery
The Generic is a general purpose 12V 7Ah sealed lead acid (SLA) battery with a 5 year floating design life that meets both IEC and JIS standards. It is suitable for use in a wide range of domestic and commercial applications such as mobility, UPS, fire and security systems.
Inception Controller | ||
Case Material | ABS plastic | |
Dimensions | 205mm x 94mm x 36mm | |
Shipping Weight (gross) | 1.2kg | |
Installation Environment | 0°C-50°C @ 15%-90% relative humidity (non-condensing) | |
Power Source - To “DC IN” (recommended): - To “BATT” (alternate method): | 18V to 24VDC 2.5A (e.g. the supplied 24V 2.5A PSU) Note: A 12V, SLA Battery of 7AH to 18AH capacity must be connected to 'BATT' input. 12.8V-14VDC 2.8A (e.g. a separate external battery-backed power supply) Note: "DC IN" should not be connected when powered via the BATT connection | |
Battery (supplied separately) | 12 Volt Sealed Lead-Acid (gel) type - 7 to 18 Amp-Hour | |
Idle Current Consumption - DC IN: (24V DC) - BATT: (DC IN = 0V) Note: Does not include battery charging or current required by any peripheral devices. | 60mA (85mA with Ethernet connected) 110mA (150mA with Ethernet connected) | |
Additional Current Required For: - Built-in Relays: (out 1 ~ out 4) - Inception WiFi Adapter: - Inception 4-Port USB Hub: | 25mA per relay (33mA when Controller powered from "BATT" input) 25mA (40mA when Controller powered from "BATT" input) 20mA (40mA when Controller powered from "BATT" input) Not including current required by any device connected to a USB Port | |
Power Supply Outputs: - V OUT (4-PIN): - V OUT (2-PIN): - LAN +: - READER +: - USB 2.0: - Maximum Combined Current - All Outputs | See notes 1 & 2 below 13.4VDC +/-150mV 750mA max 13.4VDC +/-150mV 1.5A max 13.4VDC +/-150mV 350mA max 13.4VDC +/-150mV 1A max 5VDC 500mA max 2.5 A | |
Battery Charger Output Voltage: | 13.75VDC / Output Current: Up to 500mA | |
Typical Battery Backup Time: - 7AH Battery: - 18AH Battery: - 18AH Battery: | With Ethernet or Wi-Fi + 1 LCD Terminal + up to 200mA for other devices. 16 Hours 40 Hours 24 Hours Configuration as above but up to 500mA for other devices. | |
AC Fail Detect (on "DC IN"): | 16 Hours | |
Output Fuses: | 40 Hours | |
Battery Input Fuse: | 24 Hours Configuration as above but up to 500mA for other devices. | |
Battery Deep Discharge Protection Activated: | 10.4V / Restored: 12.5V | |
Zone Inputs: | 8 | |
Relay Outputs: | 4 (“OUT1-4”) | |
Relay Contact Rating: | 5A 30VDC or AC (See note 2 below) | |
Indicator LED's: | 11 | |
Alarm Reporting Formats: | ContactID or IR-fast (via T4000 or SkyTunnel) | |
12V 7.0Ah Sealed Lead Acid Battery | ||
Cells Per Unit | 6 | |
Voltage Per Unit | 12 | |
Capacity | 6.5Ah@20hr-rate to 1.75V per cell @25 C | |
Weight Approx. | 1.9 Kg | |
Max. Discharge Current | 65A (5 sec) | |
Internal Resistance | Approx. 35 mΩ | |
Operating Temperature Range | Discharge: -20 ~60 °Charge: 0 °C~50°C Storage: -20 C~60 C 0°C | |
Normal Operating Temperature Range | 25 C+/-5 C | |
Float charging Voltage | 13.7 to 13.9 VDC/unit Average at 25 C | |
Recommended Maximum Charging Current Limit | 2.0 A | |
Equalization and Cycle Service | 14.6 to 14.8 VDC/unit Average at 25 C | |
Self-Discharge | Valve Regulated Lead Acid (VRLA) batteries can be stored for o more than 6 months at 25 C. Self f-discharge ratio less than 3% o per month at 25 C. Pleas e charge bat teries before using | |
Terminal | Faston Tab 187(F1)/Faston tab 250(F2) | |
Constainer Material | A.B.S. (UL94-HB) , Flammability resistance of UL94-V2 can be available upon request. | |
Dimensions | 151(L) 65(W) 100(H) |
Model | Description | Price | Stock | |
---|---|---|---|---|
IK-INC3 | Controller Kit 3, Sm Enclosure & Battery, SIFER Ready | $1,175.21 | Add to Cart |
Filename | Size | ||
---|---|---|---|
![]() |
IK-INC3 Kit Datasheet | 352KB | Download |
![]() |
995200 Datasheet.pdf | 3MB | Download |
![]() |
996300AU Datasheet.pdf | 2MB | Download |
Access Control > Controllers
Access Control > Controllers
Access Control > Controllers
Most of our shipments are delivered using Australian courier companies such as Toll, Star Track Express, TNT or Border Express. Over 90% of orders are delivered within 2 business days.
Contact our sales team to see if the item you want to purchase is available to collect from the warehouse nearest to you.
We have many international clients. Contact our sales team for delivery costs and times.
POSMarket can provide your business with the hardware, software, services and consumables you need to take your business to the next level. We can develop custom software for your next project or customise a solution from off-the-shelf software to suit your needs.
Request a Consultation Today