1 x Inner Range EliteX Standard Keypad 1 x Inception Controller 1 x Integriti 8 Input 2 Siren I/O LAN Expander (IOEXP) 1 x Integriti UniBus 8 Input Expander to suit ISC / IOEXP 1 x Integriti UniBus 8 Relay Output Expander to suit ISC / IOEXP 1 x Inception to T4000 Security Communicator Interface Cable 1 x Integriti Extra Large Powered Enclosure with 3 Amp Power Supply 1 x Multipath T4000 Lite 4G, Dual Sim, 3 Inputs, 3 Outputs, (Telstra/Optus) 1 x 12V 7.0Ah Sealed Lead Acid Battery
Inner Range EliteX Standard Keypad The EliteX standard keypad is an elegantly designed terminal that features a clear and easy to read OLED display. Users can utilise the keypad to perform typical operations on the Integriti system including control of security areas, door access, event activity review and controlling the state of outputs.
Inception Controller Designed to communicate with alarms using modern IP alarm transmission methods. Inception leverages its internet based connectivity to deliver IP alarms to the monitoring station of your choice. Additionally all alarm communication is secured using 128Bit AES encryption to ensure all data is kept private.
Integriti 8 Input 2 Siren I/O LAN Expander (IOEXP) The Integriti 8 Zone LAN Expander Module connects directly to the Integriti ISC Controller's RS-485 LAN and provides an additional 8 Zone inputs and 2 Auxiliary outputs.
Up to 99 Zone Expander Modules can be connected to the Integriti RS-485 LAN or via IP LAN if connected with CLOE modules (Part 995093).
Integriti UniBus 8 Input Expander to suit ISC / IOEXP The UniBus 8 input expander connects to an Integriti Security Controller (ISC), 8 zone expander or 16 zone expander module via the UniBus port. It provides an additional 8 zone inputs that support all Integriti zone types including multistate and counter types along with extra detector power supply connections (DET+) to simplify device wiring.
Integriti UniBus 8 Relay Output Expander to suit ISC / IOEXP The UniBus 8 relay output expander board provides eight independent, high current normally open or normally closed relay outputs, offering a general purpose interface in applications such as warning devices (strobes, etc.), building automation, process control and access control. The board is connected directly to the host module or another UniBus Board via the UniBus cable supplied.
Inception to T4000 Security Communicator Interface Cable This cable is designed to connect the T4000 (IR-998530) or T4000 Lite (IR-998530LT) Communicator to the USB port on the Inception Controller.
Integriti Extra Large Powered Enclosure with 3 Amp Power Supply Designed for our Integriti Module PCBs, the Low Profile Metal Enclosures present a modular, application oriented solution to suit a variety of installation requirements. The enclosures are designed to minimise necessary wall space and simplify the practice of selecting and installing enclosures.
Multipath T4000 Lite 4G, Dual Sim, 3 Inputs, 3 Outputs, (Telstra/Optus) The Multipath-IP T4000 Lite features the same highly advanced feature set as the original T4000, only in a smaller form factor, while packing more inputs and outputs. It's on board battery and PSTN dial through functions are not fitted to the device, which is a great way to retrofit existing systems from an existing battery-backed alarm system. With its tiny footprint, the new T4000 Lite should fit into existing alarm security cabinets.
12V 7.0Ah Sealed Lead Acid Battery This Battery is a general purpose 12V 7Ah sealed lead acid (SLA) battery with a 5 year floating design life that meets both IEC and JIS standards. It is suitable for use in a wide range of domestic and commercial applications such as mobility, UPS, fire and security systems.
Inner Range EliteX Standard Keypad
152h x 90w x 18d mm
0 Degrees - 50Degrees C @ 15% to 85% relative humidity (non-condensing)
18V to 24VDC 2.5A (e.g. the supplied 24V 2.5A PSU) Note: A 12V, SLA Battery of 7AH to 18AH capacity must be connected to 'BATT' input.
12.8V-14VDC 2.8A (e.g. a separate external battery-backed power supply) Note: "DC IN" should not be connected when powered via the BATT connection
Battery (supplied separately)
12 Volt Sealed Lead-Acid (gel) type - 7 to 18 Amp-Hour
Idle Current Consumption - DC IN: (24V DC) - BATT: (DC IN = 0V) Note: Does not include battery charging or current required by any peripheral devices.
60mA (85mA with Ethernet connected) 110mA (150mA with Ethernet connected)
Additional Current Required For: - Built-in Relays: (out 1 ~ out 4) - Inception WiFi Adapter: - Inception 4-Port USB Hub:
25mA per relay (33mA when Controller powered from "BATT" input) 25mA (40mA when Controller powered from "BATT" input) 20mA (40mA when Controller powered from "BATT" input) Not including current required by any device connected to a USB Port
Power Supply Outputs: - V OUT (4-PIN): - V OUT (2-PIN): - LAN +: - READER +: - USB 2.0: - Maximum Combined Current - All Outputs
See notes 1 & 2 below 13.4VDC +/-150mV 750mA max 13.4VDC +/-150mV 1.5A max 13.4VDC +/-150mV 350mA max 13.4VDC +/-150mV 1A max 5VDC 500mA max 2.5 A
Battery Charger Output Voltage:
13.75VDC / Output Current: Up to 500mA
Typical Battery Backup Time:
- 7AH Battery: - 18AH Battery: - 18AH Battery:
With Ethernet or Wi-Fi + 1 LCD Terminal + up to 200mA for other devices. 16 Hours 40 Hours 24 Hours Configuration as above but up to 500mA for other devices.
AC Fail Detect (on "DC IN"):
Battery Input Fuse:
24 Hours Configuration as above but up to 500mA for other devices.
Battery Deep Discharge Protection Activated:
10.4V / Restored: 12.5V
Relay Contact Rating:
5A 30VDC or AC (See note 2 below)
Alarm Reporting Formats:
ContactID or IR-fast (via T4000 or SkyTunnel)
XSmall - 252(L) x 263(W) x 85(D) (mm): Part# 995200XS Small - 252(L) x 358(W) x 85(D) (mm): Part# 995200PE2 or 995200PE3 Medium - 460(L) x 358(W) x 85(D) (mm): Part# 995201PE2, 995201PE3 or 995201PE8 XLarge - 702(L) x 358(W) x 85(D) (mm): Part# 995203PE2, 995203PE3 or 995203PE8 WideBody - 580(L) x 510(W) x 95(D) (mm): Part# 995204PE3 or 995204PE8 Rack Mount - 2RU 680(L) x 420(W) x 85(D) (mm): Part# 995220PE2, 995220PE3 or 995220PE8
60mA standby. 100mA with both Aux relays on NOTE: Current consumption does not include the current required by detectors or other external devices such as buzzers, lamps or any device attached to the DET+, LAN+ and UniBus connections
2 Amps @ 30VDC
8 x Multistate Zone Inputs
2 x Relay Output NO|COM|NC
2 pin connection for cabinet tamper switch
1 x UniBus Host expansion port
1, Includes LAN+, LAN-, A, B. (LAN addressing set via DIP switches)
1 x Internal & 1 x External variable tone Siren Outputs*
1 x Integriti External Power Supply Connection
4 x 13.75Vdc nominal outputs (DET+/DET- Detector Power)
External Power Supply Monitoring (Compatible with IR SMART PSU Devices)
Most of our shipments are delivered using Australian courier companies such as Toll, Star Track Express, TNT or Border Express. Over 90% of orders are delivered within 2 business days.
Click & Collect
Contact our sales team to see if the item you want to purchase is available to collect from the warehouse nearest to you.
We have many international clients. Contact our sales team for delivery costs and times.
Cost-effective solutions to suit your business needs
POSMarket can provide your business with the hardware, software, services and consumables you need to take your business to the next level. We can develop custom software for your next project or customise a solution from off-the-shelf software to suit your needs.