1300 737 998
Need Help?

Our expert team has specialised
training & experience to help
find the right solution for your

Call 1300 737 998

Integriti 996001AUPS

from $2,047.38 (incl. GST)

POSMarket SKU: Z15956

This model is available in 3 different configurations. Select a configuration from the list below or contact one of our experts on 1300 737 998 for help.

Security Controller

Product Rating
Product Overview
The Integriti Security Controller (ISC) is an IP-based master controller for the Integriti modular hardware system. Equipped with 16 Zone Inputs, 2 Auxiliary Relay Outputs, Power Supply, Ethernet Port, Modem, and Internal/External Siren outputs, the ISC can be used both stand-alone or expanded further via its UniBus and RS-485 Sub-LAN ports.

The flexible, modular design of the ISC allows a single stand-alone controller to be expanded to form a network of IP or RS-485 expansion modules supporting up to 3,000 Zone Inputs, 3,000 Outputs, 250 Areas and over 1,000 Card Readers and 240 Doors. User capacity of up to 100,000 users is available as a standard expansion option, and capacity for 500,000+ users is also available where required (contact Inner Range).

The ISC also offers a UniBus in-cabinet expansion interface where a variety of UniBus I/O and communications devices can be connected directly to the controller and housed within the same tamper-protected enclosure.

Integriti's multi-controller architecture allows any number of ISC’s to be combined within the Integriti software package to form a globally managed small, medium or enterprise sized system where the entire network of controllers is managed as a whole. This architecture allows for an infinite number of Readers, Doors, Areas, Zone Inputs and Outputs.

  • IP based Multi-Controller system architecture options
  • 32 Bit ARM CPU with Real Time Clock
  • Ultra high speed proprietary operating system
  • Ethernet RJ45 Connection for:
    • Connectivity to Integriti Software
    • SkyTunnel® Cloud Services
    • Integriti Mobile Smart Phone connectivity
    • Peer to Peer communications
    • Automation Interface
    • BMS / HVAC Integration
    • EMS / Lift Access Control Integration
  • RS-485 Sub-LAN
  • USB Master & Slave Ports
  • UniBus In-Cabinet Expansion Interface
  • Multipath-IP / GSM STU Port (Port Zero RS-232)
  • 16 Zone Inputs - Multistate or Analogue
  • 2 Auxiliary Output Relays & separate Watch Dog Output
  • Dedicated Tamper Input
  • Internal & External Siren Outputs
  • RJ-12 PSTN Dialler/Modem Connection
  • Intelligent Power Control via Smart Fuses
  • 64 MB RAM / 4 GB Micro SD Memory
  • Smart Card Slot (Smart cards are used for setting system dimensions)
  • Firmware Upgrade via USB, LAN or Software
Product Specifications
Security Controller (ISC)
Enclosure Dimensions Medium size enclosure 460(L) x 358(W) x 85(D) (mm)
PCB Dimensions 200(L) x 200(W) x 45(D) (mm)
Shipping Weight 6.5kg (In medium enclosure with mains transformer and cover)
Installation Environment 0ºC - 50ºC @15% - 90% Relative humidity (non-condensing)
Cabinet Battery Bracket To suit 12V 7AH sealed lead acid battery
Power Supply Type Type A (EN50131-1)
Transformer Input Voltage 240V AC -10% / +10%. 50Hertz
Transformer Output 16.5V AC. 50 Hertz
Current Consumption Maximum 500 mA from 240V AC Source
Fuse Protection Separate AC mains input fuse. 1.0 AMP Slow Blow M205 (20mm)
PCB AC Input Voltage 16 to 18V AC. 50/60 Hertz
Battery Charger Output 13.75VDC -0.15/+.05 V (AC power required)
12V, Sealed Battery Capacity Use 7.2AH or 18AH Lead Acid Type: Max 18AH
Battery Input Fuse 5 Amperes
Low Battery Alarm < 11V DC +/- 100mV
Deep Discharge Protection Activates at 10.4 V +/-100mV. Restores at 12.4V +/- 100mV
LAN “POS” & DET+ Output Voltage: 13.75V DC -0.15/+.05 V (When AC power Present)
LAN “POS” & DET+ Smartfuse trip current 2 Amperes
Maximum Ripple At maximum ancillary load current: < 200mV P-P / 75mV RMS
Low DC Voltage Alarm < 11V DC +/- 100mV
Siren Drivers Each capable of driving a 4 Ohm speaker (or 2 x 8 Ohm in parallel)
RS-485 & UniBus Parameters
UniBus In-Cabinet Expansion Up to 6 UniBus devices
RS-485 Sub-LAN Up to 250 RS-485 Sub-LAN Modules (maximum of 99 of any one type)
Current Consumption
AC Source
JP5 Setting
Total Current Limit
Static Controller Current
Battery Capacit
Max Ancillary Current
1.5A Plug Pack
Not Shorted
1.3 AMP
7 AH
Shorted 2.2 AMP 275mA
7 AH
Transformer: Shorted
2.2 AMP
18 AH
12V 7.0Ah Sealed Lead Acid Battery
Part number 1200
Cells Per Unit 6
Voltage Per Unit 12
Capacity 6.5Ah@20hr-rate to 1.75V per cell @25 C
Weight Approx. 1.9 Kg
Max. Discharge Current 65A (5 sec)
Internal Resistance Approx. 35 mΩ
Operating Temperature Range Discharge: -20 ~60 °Charge: 0 °C~50°C Storage: -20 C~60 C 0°C
Normal Operating Temperature Range 25 C+/-5 C
Float charging Voltage 13.7 to 13.9 VDC/unit Average at 25 C
Recommended Maximum Charging Current Limit 2.0 A
Equalization and Cycle Service 14.6 to 14.8 VDC/unit Average at 25 C
Self-Discharge Valve Regulated Lead Acid (VRLA) batteries can be stored for o more than 6 months at 25 C. Self f-discharge ratio less than 3% o per month at 25 C. Pleas e charge bat teries before using
Terminal Faston Tab 187(F1)/Faston tab 250(F2)
Constainer Material A.B.S. (UL94-HB) , Flammability resistance of UL94-V2 can be available upon request.
Dimensions 151(L) 65(W) 100(H)
996001AUPSB Security Controller (ISC), Medium Enclosure Kit with Battery $2,310.00
Add to Cart
996001AUPS Security Controller (ISC) in Medium Powered Enclosure $2,279.75
Add to Cart
996001AUPCB&K Integriti Security Controller (ISC) $2,047.38
Add to Cart
Product Accessories
Not all accessories and consumables are listed on our website. Please contact one of our experts using the 'Ask an Expert' form or call us on 1300 737 998 if you don't find what you're looking for.
PDF Document 996001AUxx Datasheet.pdf 3MB Download
PDF Document Battery.pdf 364KB Download
PDF Document 12xxx Battery Safety Datasheet.pdf 4MB Download
Product Videos
No videos found for this product.

Please contact our team for more information using the 'Ask an Expert' form or call us on 1300 737 998.

Contact our Team
Warehouse Locations
Warehouse Locations
  • Huntingwood 2148
  • Rosehill 2142
  • Rydalmere 2116

  • Acacia Ridge 4110
  • Tingalpa 4173

  • Box Hill 3128

  • Burswood 6100

Related Products

Inner Range 996300AU Inner Range 996300AU

Access Control > Controllers

Inception IK-INC1 Inception IK-INC1

Access Control > Controllers

Inception IK-INC3 Inception IK-INC3

Access Control > Controllers

Fast Delivery
Courier Delivery
Express Courier Delivery

Most of our shipments are delivered using Australian courier companies such as Toll, Star Track Express, TNT or Border Express. Over 90% of orders are delivered within 2 business days.

Click and Collect
Click & Collect

Contact our sales team to see if the item you want to purchase is available to collect from the warehouse nearest to you.

International Delivery
International Delivery

We have many international clients. Contact our sales team for delivery costs and times.

Cost-effective solutions to suit your business needs

POSMarket can provide your business with the hardware, software, services and consumables you need to take your business to the next level. We can develop custom software for your next project or customise a solution from off-the-shelf software to suit your needs.

Request a Consultation Today