1300 737 998
Need Help?

Our expert team has specialised
training & experience to help
find the right solution for your

Call 1300 737 998

Integriti 995220

from $879.73 (incl. GST)

POSMarket SKU: Z16317

This model is available in 4 different configurations. Select a configuration from the list below or contact one of our experts on 1300 737 998 for help.

Rack Mount Enclosure

Product Rating
Product Overview
The Inner Range Rack Mount Enclosure (Drawer) provides a high security tamper monitored 2RU Rack Mounting solution for either Integriti System Hardware. (or Concept 3000/4000/5000 Hardware) It features a truly universal design that allows virtually all Inner Range System Controllers and LAN modules to be installed into a 19” rack equipment cabinet without restricting critical access to cabling, termination of connections or access for commissioning and maintenance purposes.

Flexible installation options allow the drawer to be configured to meet a vast array of specifications, allowing mix & match installation of System Controllers, Universal Expanders, Relay Cards, Access Control Modules, Input Expanders, UniBus Expansion Cards, Multipath Communications Devices and up to 4 Doors of fully Intelligent Access Control.

The Rack Mount Drawer is also capable of housing up to two separate internal power supplies with two separate internal 12V,7Ah sealed lead acid back-up batteries. Cabling to the drawer is managed via a rear mounted cable tie-down tray with a selection of “knockout” style cable entry points.

The mains power connection is via an Industry standard IEC connector and the Ethernet Network Connection is made via a panel mounted RJ45 socket. All other cabling is routed and securely terminated inside the tamper monitored enclosure.

The drawer construction is of a very robust 1.2mm thick metal enclosure with fully welded corners and a fully sealed base. The entire drawer slides out of the rack providing full installation and service access to all components - without taking the system offline.

Four Versions of the Rack Drawer Are Available:
  • Part 995220PE8 - Rack Drawer with Integriti 8Amp SMART power supply fitted
  • Part 995220PEI - Rack Drawer with Integriti 3Amp SMART power supply fitted
  • Part 995220PE - Rack Drawer with Integriti/Concept Standard 2Amp power supply fitted
  • Part 995220 - Empty Rack Drawer - no power supply fitted
  • 2RU Sliding 19" Rack Mountable Drawer
  • Suit 19" Rack with front and back rail mounts
  • Adjustable 600mm Ball Bearing runners to suit rail spacings between 520 - 740mm
  • Universal PCB Mounting Plate and Battery Holders
  • Sturdy metal drawer with sealed base and welded corners
  • Tamper monitored ventilated metal cover
  • Rear Cable Tie Down Tray
  • Supplied with ball bearing runners
  • 3 x 2-Way Circular Cable Entry Knockouts, 35mm or 64mm
  • Supplied with cable entry bushing
  • Ethernet Connection - RJ45
  • Chassis Mount Mains Power Connection - IEC 240Vac Mains power connector - Fused
  • Assisted Ventilation - Provision for 60mm panel mount fan
  • Mounting positions for all Integriti Controllers, LAN Modules & UniBus Devices
  • Mounting positions for all Concept 3000/4000/5000 Security System Controllers & LAN Modules (Excluding the Intelligent 4-Door Controller)
  • House up to 2 x 7Ah 12V Batteries
  • House up to 2 x 3A Ac transformers or 1 x 3A & 1 x 4A
Product Specifications
Rack-Mount Enclosure
Electrical Specification (3Amp Powered Version Only)
Mains Input 240V AC, 50Hz
Power Supply Input 16V AC @ 3A. (From Transformer provided)
Output Voltage 13.8VDC +/-2%
Maximum Output Current 3 Amps.
Output Ripple <100mV RMS max. @ full load.
Conversion Efficiency 85%. approx.
Load Regulation +/- 500mV @ Iout = 0.1A to 3.0A
See separate PSU datasheets for specifications of 2Amp & 8 Amp models
Mechanical Specifications
Dimensions 675mm including cable tray and front handles (cable tray 80mm, handles 35mm, drawer 560mm)
Width 420 mm. Height: 85 mm
Rear Cable Tray 80mm x 420mm
Rack Mount Suit 19” Rack with front and back rail mounts
Runners Adjustable 600mm Ball Bearing runners to suit rail spacing between 520 - 740mm
Weight 12 kg. (Powered Version)
Operating Environment 0º to 50º Celsius (Ambient) 15% to 85% Relative humidity (non-condensing)
995220PE8 Integriti Rack Mount Enclosure + 8Amp PSU $1,341.73
Add to Cart
995220PEI Rack Mount Enclosure with 3A Smart PSU $1,087.63
Add to Cart
995220PE Powered Rack Enclosure - Fitted with 2A PSU, Transformer & IEC socket $1,006.78
Add to Cart
995220 Unpowered Rack Enclosure $879.73
Add to Cart
Product Accessories
Not all accessories and consumables are listed on our website. Please contact one of our experts using the 'Ask an Expert' form or call us on 1300 737 998 if you don't find what you're looking for.
PDF Document 995220xx RackMount Enclosure Datasheet.pdf 814KB Download
PDF Document 995220PEx Layout Guide.pdf 154KB Download
PDF Document 995220xx Datasheet.pdf 814KB Download
Product Videos
No videos found for this product.

Please contact our team for more information using the 'Ask an Expert' form or call us on 1300 737 998.

Contact our Team
Warehouse Locations
Warehouse Locations
  • Huntingwood 2148
  • Rosehill 2142
  • Rydalmere 2116

  • Acacia Ridge 4110
  • Tingalpa 4173

  • Box Hill 3128

  • Burswood 6100

Related Products

Aetek AET-XE12-120-TX Aetek AET-XE12-120-TX

Access Control > Accessories

Inception 999030 Inception 999030

Access Control > Accessories

Integriti 995201PEI Integriti 995201PEI

Access Control > Accessories

Fast Delivery
Courier Delivery
Express Courier Delivery

Most of our shipments are delivered using Australian courier companies such as Toll, Star Track Express, TNT or Border Express. Over 90% of orders are delivered within 2 business days.

Click and Collect
Click & Collect

Contact our sales team to see if the item you want to purchase is available to collect from the warehouse nearest to you.

International Delivery
International Delivery

We have many international clients. Contact our sales team for delivery costs and times.

Cost-effective solutions to suit your business needs

POSMarket can provide your business with the hardware, software, services and consumables you need to take your business to the next level. We can develop custom software for your next project or customise a solution from off-the-shelf software to suit your needs.

Request a Consultation Today